AR Fire Safety Solutions

FM 200 Suppression System in Delhi, India. Universally accepted FM 200 or ‘Factory Mutual 200’ also called heptaflouropropane is a colorless and odourless gaseous halocarbon used as gaseous fire suppression agent. FM 200 Suppression System in Delhi, India. This gas is liquefied under pressure for storage. FM 200 is most suitable for computer rooms, data centres, record rooms, banking assets, museums and archives, process, chemical and flammable storing facilities.

Fire Guards offers best quality suppression system both pre-engineered FM 200 fire suppression system that does not require distribution of pipes or just few pipes only and secondly engineered FM 200 fire suppression system which offers tailor made or specially designed structure for its application.

AR Fire Safety Solutions have a system that fits right into the engine and gets connected to the cylinder valve. In case of extremely high temperature or fire, the pipe will burst and the distinguisher will cover the affected areas. This feature can make the alarm go off, isolate the power or do both of them together. We understand how expensive vehicles are and that is why you can trust us with them. Our compression system has a simple installation as well as operation. Since it has minimum moving parts and does not need power backups, this compression system is very secure.

ChatGPT said:

A vehicle fire suppression system is a safety mechanism designed to detect and extinguish fires in vehicles, especially in environments where there's a higher risk of fire due to flammable materials, extreme operating conditions, or valuable equipment. These systems are commonly used in industries such as mining, construction, transportation, motorsports, and military applications.

🔥 Key Components of a Vehicle Fire Suppression System:

1. Detection System:

   • Linear heat detectors, spot sensors, or optical flame detectors.

   • Automatically senses temperature rise or flames.

2. Control Panel:

   • Receives input from detectors and activates the suppression system.

   • May include manual activation options.

3. Suppression Agent:

   • Common agents include:

     • Dry Chemical (e.g., ABC powder)

     • Foam (for fuel fires)

     • Clean Agents (e.g., FM-200 or Novec 1230 – suitable for electronics)

     • Water mist (used in certain specialized systems)

4. Distribution System:

   • Network of pipes and nozzles to deliver the suppression agent to critical areas like the engine compartment, battery systems, or fuel storage.

5. Manual & Automatic Actuation:

   • Most systems offer both for redundancy.

   • Manual pull cables, push buttons, or remote controls.

🚗 Applications:

• Mining equipment (e.g., haul trucks, loaders)

• Heavy machinery (excavators, bulldozers)

• Buses & coaches

• Race cars (mandated by most motorsport authorities)

• Military and armored vehicles

• Electric vehicles (EVs) (for battery compartment protection)

✅ Benefits:

• Minimizes vehicle downtime and repair costs.

• Enhances operator safety.

• Reduces risk of fire spreading to nearby assets.

• May be required by insurance or safety regulations.

🔧 Maintenance & Compliance:

• Regular inspections and testing are essential.

• Systems must meet standards like:

  • NFPA 17/17A

  • FM Global

  • UL certification

  • ISO 16750 (for automotive electronics)

  • Local or industry-specific codes

The FK-5-1-12 fire suppression system is a clean agent fire protection system that uses FK-5-1-12 fluid, also known by its trade name Novec™ 1230 (developed by 3M). It's widely used in environments where water from traditional sprinkler systems could damage critical equipment or irreplaceable assets.

🔍 What is FK-5-1-12?

• Chemical name: Dodecafluoro-2-methylpentan-3-one

• Trade name: Novec™ 1230 (by 3M)

• CAS number: 756-13-8

• Type: Clean, gaseous fire suppression agent

• Extinguishing method: Primarily via heat absorption

• Ozone Depletion Potential (ODP): 0

• Global Warming Potential (GWP): 1 (very low)

• Atmospheric Lifetime: ~5 days (very short)

• Safety Margin: Wide, for use in normally occupied spaces

✅ Key Features

• Environmentally friendly: Low GWP and zero ODP

• Safe for electronics: Leaves no residue; non-conductive

• Human-safe: Suitable for use in occupied areas

• Fast-acting: Extinguishes fires in seconds

• Compact storage: Requires less space than inert gas systems

🏢 Common Applications

• Data centers & server rooms

• Archives and libraries

• Museums and art galleries

• Medical equipment rooms

• Control rooms

• Telecommunications facilities

🔧 System Components

1. Agent storage cylinders (with FK-5-1-12)

2. Discharge nozzles

3. Control panel

4. Detection system (smoke or heat detectors)

5. Piping network

6. Pressure release vents (for room integrity)

🔥 How It Works

1. Fire is detected by a detection system (usually smoke or heat sensors).

2. Control panel activates and releases FK-5-1-12 into the protected area.

3. The agent vaporizes and absorbs heat, lowering the flame temperature below combustion point.

4. Fire is extinguished, and the agent dissipates without leaving residue.

🧑‍⚕️ Health & Safety

• Safe for humans at designed concentrations.

• Should still be discharged in a controlled manner.

• Room should be ventilated after discharge.

🛠️ Maintenance

• Regular system inspections (per NFPA 2001 or local standards)

• Integrity testing (e.g., door fan test)

• Refill and re-certify agent cylinders after use

The FK-5-1-12 fire suppression system is a clean agent fire protection system that uses FK-5-1-12 fluid, also known by its trade name Novec™ 1230 (developed by 3M). It's widely used in environments where water from traditional sprinkler systems could damage critical equipment or irreplaceable assets.

🔍 What is FK-5-1-12?

• Chemical name: Dodecafluoro-2-methylpentan-3-one

• Trade name: Novec™ 1230 (by 3M)

• CAS number: 756-13-8

• Type: Clean, gaseous fire suppression agent

• Extinguishing method: Primarily via heat absorption

• Ozone Depletion Potential (ODP): 0

• Global Warming Potential (GWP): 1 (very low)

• Atmospheric Lifetime: ~5 days (very short)

• Safety Margin: Wide, for use in normally occupied spaces

✅ Key Features

• Environmentally friendly: Low GWP and zero ODP

• Safe for electronics: Leaves no residue; non-conductive

• Human-safe: Suitable for use in occupied areas

• Fast-acting: Extinguishes fires in seconds

• Compact storage: Requires less space than inert gas systems

🏢 Common Applications

• Data centers & server rooms

• Archives and libraries

• Museums and art galleries

• Medical equipment rooms

• Control rooms

• Telecommunications facilities

🔧 System Components

1. Agent storage cylinders (with FK-5-1-12)

2. Discharge nozzles

3. Control panel

4. Detection system (smoke or heat detectors)

5. Piping network

6. Pressure release vents (for room integrity)

🔥 How It Works

1. Fire is detected by a detection system (usually smoke or heat sensors).

2. Control panel activates and releases FK-5-1-12 into the protected area.

3. The agent vaporizes and absorbs heat, lowering the flame temperature below combustion point.

4. Fire is extinguished, and the agent dissipates without leaving residue.

🧑‍⚕️ Health & Safety

• Safe for humans at designed concentrations.

• Should still be discharged in a controlled manner.

• Room should be ventilated after discharge.

🛠️ Maintenance

• Regular system inspections (per NFPA 2001 or local standards)

• Integrity testing (e.g., door fan test)

• Refill and re-certify agent cylinders after use

AR Fire Saftey Solutions 

Top Manufacturer & Supplier of 
Fire Supression system 
& related products 

Deals in Delhi NCR Pan India